MONSTER Jeep® / STADIUM Jeep® / STREET Jeep®
Item N°. 40020R
Monster Jeep/ 26ccm RTR, red body

Item N°. 40030R
Monster Jeep/ 26ccm RTR, black body

Item N°. 40050R
Monster Jeep/ 26ccm RTR, transparent body

Item N°. 40050
Monster Jeep/ 26ccm, transparent body
 Item N°. 41020R
Stadium Jeep/ 26ccm RTR, red body

Item N°. 41030R
Stadium Jeep/ 26ccm RTR, black body

Item N°. 41050R
Stadium Jeep/ 26ccm RTR, transparent body

Item N°. 41050
Stadium Jeep/ 26ccm, transparent body
With the doubtless very impressive Jeep model we again extended our model range. All our Monster models are available in three different types. As Monster Jeep with the massive wheels. As Stadium Jeep with profiled tires for almost every surface or as Street Jeep ideal for driving on parking sites. The 26cc Zenoah engine guarantees sufficient power. All RTR Hummer models are equipped with a rotary knob radio control system. The polycarbonate bodyshell is coloured and the decals are applied (except for RTR version with transparent body). The RTR models are all mounted ready to run.


The Monster Jeep with the massive wheels is available in three different RTR versions. On the one hand with coloured and decaled bodyshell either in black or red, a further decal set with writings a.s.o. for additional decoration is enclosed. Another RTR version can be ordered with transparent bodyshell for your own painting, here the decals are just enclosed, not applied. The fourth version is delivered without radio control system with transparent bodyshell for your own design.

The Stadium Jeep only differs in the slightly smaller profile tire equipment and the modified gear transmission ratio to the Monster Jeep. We deliver the Stadium Jeep also in three RTR versions with either black, red or transparent bodyshell. The fourth version can be ordered without radio control system with transparent bodyshell for your own design.

The Street Jeep has a modified front axle and different chassis adjustments. This model is delivered with the Slick tire equipment of the FG Race Trucks. The three RTR versions content the radio control system a polycarbonate bodyshell either in black, red or transparent colour. The decals of the black and red bodyshells are already applied, a further decal set is enclosed for addional decoration.
The fourth version we deliver without radio control system with transparent bodyshell for your own design.
 Item N°. 42020R
Street Jeep/ 26ccm RTR, red body

Item N°. 42030R
Street Jeep/ 26ccm RTR, black body

Item N°. 42050R
Street Jeep/ 26ccm RTR, transparent body

Item N°. 42050
Street Jeep/ 26ccm, transparent body
Technical description of the 1:6 Jeep models:
All chassis parts are mounted on a 4mm angled alloy plate. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out through track rods with right-/left-handed thread, at the rear axle you can modify king pin angle and toe-in through adjusting screws. 8 oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle which can absorb also heavier bumps to a great extent and ensure an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. The alloy side plates protect the rc system as well as the tank. Monster and Stadium Jeep are delivered with chrome-plated rims, the Street version has rims in silver colour.

The models are equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.
Jeep® and the Jeep® grille design are registered trademarks of DaimlerChrysler Corporation. Jeep® CJ-7 and its trade dress are used under license from DaimlerChrysler. ©DaimlerChrysler Corporation 2006.