Item N°. 9404
Sportsline 04 Chassis wide/ 23ccm
Item N°. 9404R
Sportsline 04 Chassis wide RTR/ 23ccm
Design your new GT1 Sportsline Chassis according to your own requirements and demands. With the Sportsline 04 we enable you a reasonable start in the 1:5 GT1 model scene. As we don’t know where and how you would like to use your model car we offer you some Tuningkits to a special price. So it is up to you at which price and with which equipment you want to begin. To receive the special price of the Tuningkit it is necessary to order it together with the chassis (see recommended Tuningkits).
Of course the FG Sportsline 04 Chassis wide is available as RTR version, too = ready to run completely equipped with radio control system. Installed is a FM rotary knob system with a servo for steering and a servo for throttle and brake.
Recommended Tuningkits >
Suitable GT1 Bodies > |
Technical description of the 1:5 Sportsline 04 Chassis wide:
The wide version of the Sportsline 04 Chassis is built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front and rear axle king pin angle, trailing effect and toe-in can be adjusted by means of track rods or respectively adjusting screws with right-/ left-handed thread. Further equipment points are differential gear, easy-running FG ball drive, alloy brake caliper with big brake disk, oil-pressure shock absorbers with volume control and external adjusting ring for the initial stress of the springs. All rotating parts as shafts, axles, clutch bell a.s.o. are supported by ball bearings.
The models are equipped with a powerful 23ccm combustion engine which runs with a 2-stroke petrol-oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-experienced system: engine - 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box. The tires are ready glued. |
|
